Point-of-Entry System Sizing in New Berlin, WI

Point-of-Entry System Sizing in New Berlin, WI

The most common problem with whole house water filtration is a system that is too small. It works fine with one shower running, then the pressure drops when the dishwasher and a second shower start. New Berlin, WI Whole House Water Filtration sizes point-of-entry systems in New Berlin, WI around your real peak demand.

We look at three things. First, fixture count: each full bathroom adds roughly 2 to 3 gallons per minute of possible demand. Second, the main line size, usually 3/4 inch or 1 inch, which limits what can reach the filter. Third, the media. Carbon needs contact time, so a tank rated for 10 GPM of chlorine reduction may only be good for 5 GPM if chloramine or PFAS is the target.

From there we pick tank diameter, media volume and port size. A 1 inch port on a 1 inch main avoids a bottleneck. A 10 x 54 inch tank fits many smaller homes. Larger homes often need 12 or 13 inch tanks.

We write the numbers down for you so you can compare quotes on the same basis.

Call (833) 452-1903 to get point-of-entry system sizing in New Berlin, WI before you buy any water filtration system.